How Keith Robins Photography takes portraits outdoors in the dark!
You'd be forgiven for thinking these portraits were taken in a studio - whereas actually they were amid the bluebells of Sparkford woods around dusk, plus another two hours beyond.

Here's Bob, one of YPG's newer members, studying the results of his experimenting with a fibre optic ring flash while the main studio light is set off via my radio trigger. Okay, so I should have made more of the gorgeous bluebells, but I've been there, done that. Besides, portraits are my favourite area of photography.




Running a studio light away from any mains electricity is usually extremely expensive. Not anymore! Maplins sell a 1,000 watt inverter for less than £100
This picture of Charlotte was powered by a 12volt car battery, through a maplin invertor and has no trouble powering a single Elinchrom 200watt D-Lite2.
A Kenro five-in-one reflector helped lighten the shadows and eliminated the need for a second Elinchrom head. The Elinchrom D-lite2 heads have a 4 amp drain but it is only for 0.7 of a second so the 1,000watt inverter doesn't quite reach the stage where the power safety switch cuts out.



Laura, who's never done any sitting in front of a camera before, came along too and with a little verbal encouragement enabled us to capture this lovely semi black and white photo. I said that her eyes were one of her more attractive features and that I'd try to show them at their best.
I love playing around in photoshop and creating these semi black and whites with a softness produced via Guassian blur along with a layer mask.
For instance this one of Laura has a blurred copy layer, but the semi black and white effect is the result of leaving the blur at 50% then highlighting the lower layer and using the Mono button of Colour Mixer in CS2.

I love the way Emily's face is illuminated from a long way around to the left and only creates a small nose shadow in the shot on the left, plus how she's looking straight up at the large white reflective brolly. Shoot-thro brollies seem to lose a lot of power by not reflecting all the light so I'm really glad I snapped up this large bargain of a reflective brolly at a photo sale for £15.
Meanwhile, the nose shadow across Charlotte's cheek doesn't look right here and I should have asked her to tilt her head to the opposite side.
However, I still like the colour, the softness and especially the twinkle in her eye. Notice how the reflector casts a faint catchlight in her left eye?



My favourite shot of the evening is this one of Emily with it's superb soft lighting, a smile that's not over the top, a good sized catchlight in both eyes, plus the way her tumbling hair surrounds her face adding even more beauty to the finished photo.
Bluebells? What bluebells? They were there in the background, promise! I'm more than happy with these results and look forward to the next time with this trio of amazing girls.
Keith Robins.

Take a £7 shower curtain, plus 12 feet of copper tubing and make a 3 foot by 6 foot reflector.
My wife sewed a pocket at each end of the curtain from the bathroom department of a DIY warehouse leaving an access point at one end. Into these pockets I slipped two lengths of plumbers 15mm copper tubing with a 'Tee' joint soldered in the centre of each

Cut off a seven foot length of tube and about a foot in from each end bend to almost ninety degrees, 75 degrees is best as ninety allows the joints to come apart during use and too straight an angle makes it difficult to assemble.
Use a drill to remove any excess solder from the empty socket of the 'Tee' joint which may prevent easy entry of the main support pipe.
After bending the pipe you'll need to cut the ends back until you can assemble the framework without struggling yet still keeping the material taut.
There are several benefits to bending the pipe, easy assembly, creates a natural spring which keeps material taut, easy dis-assembly, and less of a sharp shadow caused when using as a sun diffuser.
There is very little twist on account of the two bends and the positive way they lock in place whereas the mark one model suffered a lot from twisting in even a light breeze as it had no bends at all.
It's light enough to be held out level from one end with two hands and the addition of a clamp and wing nut makes for easy adjustment.
Total costs - about £15. Time to make - a couple of hours one Sunday afternoon. Assembly of the finished DIY reflector takes just twenty seconds and packing it up takes thirty. The very first time it took half a minute to put up and has since worked out at a constant twenty seconds. Rolling up the material and slipping on an elastic band takes a little longer as I try to avoid creasing the shiny material - I've taken longer to find a spare memory card!
okay, so the main pipe is rather long and unwieldy but a small price to pay when similar sized reflectors cost around £150.
A lighting stand makes this a very versatile reflector / diffuser for portrait work under all sorts of difficult lighting conditions.
I'm now working on a half sized reflector with a light spraying of golden orange paint on one side as I need a smaller reflector for helping capture golden sunrise portraits similar to those I've seen in magazines, plus I'd like to bounce a flash out of it.
Hmm, a smaller one would probably fit into that 27" toolbag I picked up in Jewsons Building merchants for £14, along with all the other bits and pieces we strobists seem to carry around on photoshoots
Keith (Strobist) Robins